|
|
|
|
| |
|
|
|
| Gas Analyzer |
|
| |
|
|
|
|
We offer a wide range of gas analyzer. These analyzers are provided with a digital display and highly sophisticated sensors. The display shows the calculated readings, through the microcontroller circuit inside it. The results are quick as accurate. Further the sensors can sense the gas and hence provide the results accordingly. Known for its application specific design these are used in various commercial as well as industrial sectors. We can also customize these as per the changing norms and requirements of our clients. |
| |
| Salient Features : |
- Provided with Digital Display Panel
- Accurate readings
- Performance
- Smart Sensors
- Application Specific Design
- Easy to use and Operate
|
|
| Hydrogen Purity Meter |
|
The hydrogen purity meter is an electronic device to analyze the purity of Hydrogen gas. It is equipped with 3 ½ inch LED digital display which shows all the calculated readings. It requires calibration gas near sample gas for the readings to be calculated. Additionally, it has imported TCD filament which aids in accurate sensing. Further we can also customize this meter as per the specifications of our clients.
|
|
|
|
| |
| Technical Specifications : |
- Online mains Operated for Mixture of two Gases (Non-Corrosive)
- Range: 0 to 100% Resolution 0.1% (For H2. /N2 ¿ H2 in N2) - (balance gas N2)
- Calibration gas required near sample gas
- TCD Filament (imported) Diffusion type
- One needle valve and Rota meter for Gas Flow Control
- Inlet / Outlet provided
|
| |
| Features of the Electronic Control Panel : |
- Digital Display 3 ½ LED with 0.1% resolution.
- 230 Volt AC for Operation
- Zero & Span (or two points) control for calibration to get direct read out of H2 Purity
- Adjustable single Alarm (Potential free Relay Contact)
- 4 to 20 mA online operation
- Cabinet table mount or panel mount (Panel Cutout: 235 x 138mm)
- Calibration: By sample reference selector valve for calibration Purpose. To be calibrated with standard calibration gas.
|
| |
| |
| |
| |
|
| Binary Gas Analyzer |
| |
This binary gas analyzer is an instrument that can be used for any other gas mixture (Non Corrosive) or On-line gas purity monitor. The client just needs to have reference gas and calibration gas accordingly. We can also customize this analyzer as per the requirement of the clients and norms. The online mains of the analyzer are operated for mixture of two non-corrosive gases. The cabinet of electric control panel in this analyzer can be table mount or panel mount. |
.
|
| |
Binary Gas Analyzer |
| |
|
|
|
| Specifications : |
- Ranges: 0 to 100.0% Resolution 0.1% (For Ar./N2 ¿ N2 in Argon) (Ar /H2 )
- 0 to 100.0% Resolution 0.1% (For Ar, / CO2 ¿ CO2 in Argon)
- Online operation only (not for CO2 pressurize mixture cylinder gas)
- Four Filament TCD (imported) Diffusion type
- Change over valve for sample and reference
- Two needle valves and rota meter for Gas Flow Controls
|
| |
| Features of Electronic Control Panel : |
- Digital Display 3 ½ LED with 0.1% resolution
- Zero & Span (or two points) control for calibration to get direct read out of % selection
- Switch for % or mA Current Indication
- Recorder out put - mV as Standard
- Cabinet Table mount or Panel mount
|
